Minimum System Requirements:

- Windows 98, Windows 2000, Windows XP
- 64 MB RAM
- Mouse or other pointing device
- 800 x 600 screen resolution
- 256 colors, true colors recommended
- CD-ROM Drive (for installation only)
- RS232 port


Installation of the control program:

- Please close all applications, including all virus detection programs 
  and applications that are open in the sytem tray or on the Windows 
  taskbar.
- On Windows 2000 or XP, you may need to be logged in as administrator 
  or as user with administrative rights.
- Insert the CD and doubleclick on Setup.exe.
- Follow the instructions for installing the application.


Uninstalling CP_ISM01:

Windows 98

- Run the program unins000.exe in the folder C:\program files\ICS_GmbH\.

Windows 2000

- On the Windows taskbar, click Start>Settings>Control Panel>Add/Remove 
  programs. If you want to keep your user files, click Remove. If you want 
  to remove user files, click Change, and then Remove. You will be 
  prompted to remove user files.

Windows XP

- On the Windows taskbar, click Start>Settings>Control Panel>Software.
  If you want to keep your user files, click Remove. If you want to remove user
  files, click Change, and then Remove. You will be prompted to remove user
  files.


Documentation

A quick online documentation is availabe under the "Help" topic of the pull
down menu.

For a detailed documentation of the program and it's use in combination with
the ISM01 impedance and symmetry laboratory device please refer to the file 
C:\program files\ICS_GmbH\Documentation_e.pdf. This file can be read with
Acrobat Reader Version 3 and above.


Technical Support

If you need technical support or information on updates, please refer to
our webpage: www.ics-gmbh.com. If you have questions or encounter problems 
with the program, please e-mail to: info@ics-gmbh.com. Make sure that you 
include the serial number of the laboratory test device, the program version 
and the operating system information shown in the Info Box.



Known Issues of Version 1.0.8:

Date		Problem				Work around

2006-08-01     	First access to ISM01 with 	Repeat first command
		control program fails.  	to ISM01.
		Reason: Windows tries to 
		access ISM01 upon start-up 
		before the control program 
		can do so.